User's Manual
Table Of Contents
- 1 About this Guide
- 2 Safety Instructions
- 3 Unpacking
- 4 Overview
- 5 Configuring the Bridge for the First Time
- Before You Start
- Resetting the Bridge to Default Settings
- Obtaining and Assigning an IP Address
- Connecting to the Bridge Locally
- Assigning Basic Settings
- Default Settings on the Express Setup Page
- What To Do Next
- Output Power Level
- Protecting Your Wireless LAN
- Assigning an IP Address Using the CLI
- Using a Telnet Session to Access the CLI
- 6 Mounting the Bridge
- 7 Troubleshooting
- 8 Declarations of Conformity and Regulatory Information
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- Industry Canada
- Canadian Compliance Statement
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC
- Declaration of Conformity for RF Exposure
- Declaration of Conformity Statements
- 9 Bridge Specifications
4
THIRD FCC DRAFT (CISCO CONFIDENTIAL)
Warning
In order to comply with radio frequency (RF) exposure limits, the antennas for this
product should be positioned no less than 6.56 ft (2 m) from your body or nearby persons.
Statement 332
Warning
This unit is intended for installation in restricted access areas. A restricted access area
can be accessed only through the use of a special tool, lock and key, or other means of
security and is controlled by the authority responsible for the location.
Statement 37
3 Unpacking
Figure 1 shows the typical contents of the shipping container. The contents of your shipping container
may be different depending on what you ordered. Follow these ste
ps to unpack the shipping container.
Step 1 Unpack and remove the bridge and the accessory kit from the shipping box.
Step 2 Re
turn any packing material to the shipping container and save it for future use.
Step 3 V
erify that you have received the items shown in Figure 1. If any item is missing or damaged,
contact your Cisco representative or
reseller for instructions.