User's Manual

28
REVIEW DRAFT—CISCO CONFIDENTIAL
Note For additional information on the maximum power and the channels allowed in your
regulatory domain, refer to the Channels and Maximum Power Settings for Cisco Aironet
Autonomous Access Points and Bridges or the Channels and Maximum Power Settings for Cisco
Aironet Lightweight Access Points.
136 5680 17 OFF 17 17 17 20 17 17 17 20
140 5700 17 OFF 17 17 17 20
5725 to 5850 MHz
149 5745 17 OFF 17 17 17 20 17 17 17 20
153 5765 17 OFF 17 17 17 20 17 17 17 20
157 5785 17 OFF 17 17 17 20 17 17 17 20
161 5805 17 OFF 17 17 17 20 17 17 17 20
165 5825 17 OFF 17 17 17 20
1. M0 to M15 corresponds to the Modulaton and Coding Schemes (MCS0 to MCS15). The MCS settings determine
the number of spatial streams, the modulation, the coding rate, and the data rate values.
Table 4 Channels and Maximum Conducted Power in the –A Regulatory Domain with up to 3-dBi
Antennas (continued)
Maximum Conducted Power Levels (dBm) in the –A Regulatory Domain for the 5-GHz Radio with up to
3-dBi Antennas
Channel
ID
Freq
(MHz)
802.11a
Single Antenna
6 to 54 Mbps
HT-20 MHz
Dual Antennas
M0 to M15
1
Duplicate
(2x20 MHz)
Single Antennas
6 Mbps
HT-40 MHz
Dual Antennas
M0 to M15
1
Tx
A
Tx
B
Total
Pwr
Tx
A
Tx
B
Total
Pwr
Tx
A–
Tx
A
Tx
B
Total
Pwr
ap1140getstart.fm Page 28 Monday, June 16, 2008 8:49 AM