User's Manual
Table Of Contents
- 1 About this Guide
- 2 Taking Out What You Need
- 3 Overview
- 4 Installing the Access Point
- 5 Configuring the Access Point
- 6 Troubleshooting
- 7 Declarations of Conformity and Regulatory Information
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- VCCI Statement for Japan
- Industry Canada
- Canadian Compliance Statement
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC
- Declaration of Conformity for RF Exposure
- Guidelines for Operating Cisco Aironet Access Points in Japan
- Administrative Rules for Cisco Aironet Access Points in Taiwan
- All Access Points
- Declaration of Conformity Statements
- Declaration of Conformity Statements for European Union Countries
- 8 Configuring Option 43
- 9 Access Point Specifications
9
REVIEW DRAFT—CISCO CONFIDENTIAL
Table 1 shows the access point LED status indications for various conditions.
Ta b l e 1 LED Status Indications
Message
Type
Ethernet
LED
Radio
LED
Status
LED
Message
Meaning
Boot loader status Green Amber – DRAM memory test in progress.
Green Green Green DRAM memory test OK.
– Red – Board initialization in progress.
– Blinking
Green
Blinking
Green
Initializing Flash file system.
– Green Green Flash memory test OK.
Amber – White Initializing Ethernet.
Green – Blinking
blue
Ethernet OK.
Green Green Blinking
green
Starting Cisco IOS.
– – – Initialization OK.
Association status – – Green Normal operating condition, no wireless
client device associated.
– – Blue Normal operating condition, wireless
client devices associated.
Operating status Green – – Ethernet link is operational.
Blinking
green
– – Transmitting or receiving Ethernet packets.
– Blinking
green
– Transmitting or receiving radio packets.
– – Blinking
blue
Software upgrade in progress.
Blinking
green
Blinking
green
Blinking
green
Access point location command.
ap1140getstart.fm Page 9 Monday, June 16, 2008 8:49 AM