User's Manual
Table Of Contents
- Unpacking the Cisco Aironet 600 Series OfficeExtend Access Point
- Cisco Aironet 600 Series OfficeExtend Access Point Overview
- Installation Guidelines
- Cisco Aironet 600 Series OfficeExtend Access Point Radio Frequency Coverage
- Understanding Cisco Aironet 600 Series OfficeExtend Access Point LEDs
- Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point
- Configuring a Primary IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point
- Viewing the Event Log
- Accessing Online Help
- Troubleshooting
- Cisco Aironet 600 Series OfficeExtend Access Point Local Customer Interface
- Declarations of Conformity and Regulatory Information
REVIEW DRAFT—CISCO CONFIDENTIAL
15
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Cisco Aironet 600 Series OfficeExtend Access Point Local Customer Interface
Configuration Page
The Configuration page has multiple tabs to allow the user to configure different options.
Wherever applicable, default values will be shown.
The main options that can be configured on this page are:
• System
• SSID
• Local DHCP Server
• Wireless Access Network (WAN)
Shown below are illustrations of each of the tabs. Please note that the configuration fields/options shown
are not final and may need some rework.
System Tab
Figure 8System Tab