User's Manual

REVIEW DRAFT—CISCO CONFIDENTIAL
9
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Configuring a Primary IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point
Configuring a Primary IP Address on a Cisco Aironet 600 Series
OfficeExtend Access Point
Follow these steps to configure a primary IP address on your Cisco Aironet 600 Series OfficeExtend
access point.
Step 1 Click the WA N tab to open the Configuration SSID page (Figure 3).
Figure 4 Cisco Aironet 600 Series OfficeExtend Access Point Configuration WAN Page
Step 2 Obtain the IP address of your primary controller from your company’s IT professional.
Step 3 Enter the IP address of the primary controller in the Primary Controller field.
Step 4 Leave the Static IP check box unchecked to allow the WAN IP address to be assigned by DHCP.
Step 5 Click Apply to commit your changes.
Viewing the Event Log
Select Event Log to view the ongoing list of event logs for this access point (Figure 5).