User's Manual

15
Power Injectors
The 1530 Series Access Points support the following power injectors:
• AIR-PWRINJ1500-2= — 100-240 VAC input, indoor use only
• AIR-PWRINJ4= — 100-240 VAC input, indoor use only (for the 1532E only)
Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line
cord.
Statement 1023
Caution To provide inline PoE, you must use the 1500 power injector (listed above). Other power
injectors, PoE switches, and 802.3af power sources cannot provide adequate power, which may
cause the access point to malfunction and cause over-current conditions at the power source. You
must ensure that the switch port connected to the access point has PoE turned off.
Caution The 1500 power injector (AIR-PWRINJ1500-2=) and the AIR-PWRINJ4= must be used in an
indoor environment only.
Caution When the access point is installed outdoors or in a wet or damp location, the AC branch circuit
that is powering the access point should be provided with ground fault protection (GFCI), as
required by Article 210 of the National Electrical Code (NEC).