User's Manual

17
6 AP Pole/Wall Mount
This section provides instructions for installing your access point(s). Personnel installing the access
point(s) must understand wireless access points and bridging techniques and grounding methods.
Caution All installation methods for mounting an access point on any wall surface is subject to the
acceptance of local jurisdiction.
Installation Options
The 1530 Series Access Point can be wall, pole or tower mounted. There are two optional mounting kits: a
fixed mounting kit (AIR-ACC1530-PMK1=) and a pivoting mounting kit
(AIR-ACC1530-PMK2=).
Warning Only trained and qualified personnel should be allowed to install, replace, or service
this equipment. Statement 1030
Warning Installation of the equipment must comply with local and national electric codes.
Statement 1074
When mounting an access point on a horizontal or vertical surface, you must ensure that the access point is
oriented with the LED indicators pointing down (see Figure 10 on page 33). This positioning allows LEDs to
be visible to someone on the ground below the access point.
You must also ensure the access point is mounted in such a way as to ensure that all antenna ports and the
console port are accessible for future use.