User's Manual

33
347848
Checking the LEDs
One LED is located between the LAN and PoE-In connectors. It indicates the status of the access point power,
uplinks and radios. Figure 10 identifies and describes the LED functions. Table 3 provides additional LED
signal information.
Figure 10 Access Point LEDs –Shown on the Bottom of AP 1532E
LED
Indicator
Table 3 Access Point LED Signals
LED Message
Type
Color
Meaning
Boot loader
status sequence
Blinking Green
Boot loader status sequence:
• DRAM memory test in progress
• DRAM memory test OK
• Board initialization in progress
• Initializing FLASH file system
• FLASH memory test OK
• Initializing Ethernet
• Ethernet OK
• Starting Cisco IOS
• Initialization successful