Installation Guide

2-48

Cisco Aironet 1560 Series Outdoor Access Point Hardware Installation Guide

Chapter 2 Installing the Access Point

Powering the Access Point

Figure 2-31 Two-Position Terminal Block Connector

Step 8

Step 9

Insert the two-position terminal strip into the DC power opening in the access point case, and carefully

push the terminal strip into the internal connector (see Figure 2-32).

Note Ensure that the polarity of the terminal strip properly matches the polarity markings on the

enclosure (see Figure 2-33)

Figure 2-32 Inserting the Terminal Strip into the DC Power Opening in the Access Point Case

1 Securing tabs 3 Ground (DC return)

2 DC +

1 DC power opening in access point case. Also see

Figure 2-33.

2 Exploded view of the cable gland on the DC power cable

354869