Installation Guide

2-52

Cisco Aironet 1560 Series Outdoor Access Point Hardware Installation Guide

Chapter 2 Installing the Access Point

Connecting Data Cables

All models of the AP support data connections through the Ethernet port and the Small Form-factor

Pluggable (SFP) port. However, both the Ethernet port and the SFP port cannot be used for data at the

same time.

If the SFP is detected and active, the Ethernet port is disconnected. If the SFP is not detected, the

Ethernet port stays connected

If you are using the SFP port, to delivery data through a fiber-optic cable, then the AP needs to be

For details on installing Ethernet, see Connecting an Ethernet Cable to the Access Point, page 2-53.

For details on installing a a fiber-optic cable, see Connecting a Fiber-optic Cable to the AP, page 2-55.