Installation Guide

1-4
Cisco Aironet 1560 Series Outdoor Access Point Hardware Installation Guide
Chapter 1 Overview
Hardware Features
Connectors on the Base
Figure 1-1 Access Point Models AP1562I and AP1562D Base Connectors
1 SFP port
If the port is not being used, then do not remove the
covering plug. Otherwise, it may lead to water leaking
into the access point.
3 Gigabit Ethernet and PoE-In port
If the port is not in use, then the covering plug must be
tightened to 12.5 lbf-in torque. Otherwise, it may lead to
water leaking into the access point.
2 Status LED
354842
1 2 3