Installation Guide

2-19
Cisco Aironet 1560 Series Outdoor Access Point Hardware Installation Guide
Chapter 2 Installing the Access Point
Mounting the Access Point
Figure 2-7 Pivoting Mounting Bracket
Figure 2-8 Pivoting Mounting Bracket Dimensions
1 One of four bolt holes for fastening to the
back of the AP.
This is the AP-plate end of the bracket, and is
fastened to the back of the AP.
3 Screw holes for wall mounting.
These screw holes can also be used as slots for
steel band clamps in pole-mount installations.
2 Wall-plate end of the bracket. This plate is
fastened to the wall.
354866
2
1
3
352000
100
3.94
28
1.10
56
2.20
2x M8 THRU
4X 6.5MM THRU
17.10
.67
SLOT LENGTH
[4.0]
.16
SLOT WIDTH