Installation Guide

2-24
Cisco Aironet 1560 Series Outdoor Access Point Hardware Installation Guide
Chapter 2 Installing the Access Point
Mounting the Access Point
Figure 2-11 Pivoting Mounting Kit with Pole Mount Clamp
1 One of four mounting holes for the access point. This is
the AP-plate end of the bracket, and is fastened to the
back of the AP.
3 Pole mount screw clamp. It can fit poles having a
diameter of up to 3 in. (76mm).
2 One of four slots for band clamps.
This is the pivot bracket base plate, and is fastened to the
pole.
Pole mount installation using band clamps are shown in
Figure 2-12.
354867
1
3
2