Installation Guide
Table Of Contents
- Cisco Aironet 1560 Series Outdoor Access Point Hardware Installation Guide
- Preface
- Objectives
- Audience
- Organization
- Conventions
- Related Documents
- Finding the Product Serial Number
- Obtaining Documentation, Support, and Security Guidelines
- About the 1560 Access Point
- Hardware Models
- Hardware Features
- Network Deployment Examples
- Unpacking the Access Point
- Tools and Hardware
- Safety Warnings
- Before Beginning the Installation
- Becoming Familiar with Access Point Installation Components
- Mounting the Access Point
- AP Mounting Options
- Access Point Mounting Orientation
- Wall Mounting the Access Point with AIR-ACC1530-PMK1= Mounting Kit
- Wall Mounting the Access Point with AIR-ACC1560-PMK1= Mounting Kit
- Pole Mounting the Access Point with the AIR-ACC1530-PMK1= Kit
- Pole Mounting the Access Point with the AIR-ACC1560-PMK2= Kit
- Wall Mounting the Access Point with the Pivoting Mounting Kit
- Pole Mounting the Access Point with the Pivoting Mounting Kit
- Horizontally Mounting the Access Point with Optional Horizontal Mount Plate
- Installing AP Cover AIR-ACC1560-CVR=
- Installing Antennas
- Grounding the Access Point
- Powering the Access Point
- Connecting a Fiber-optic Cable to the AP
- Configuring the Access Point
- What to Do Next
- Guidelines for Using the Access Points
- Important Notes
- Controller MAC Filter List
- Using DHCP Option 43
- Monitoring the Access Point LEDs
- Verifying Controller Association
- Changing the Bridge Group Name
- Accessing the Console Port and the Reset Button
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- Industry Canada
- Declaration of Conformity for RF Exposure
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC & Medical Directive 93/42/EEC
- Declaration of Conformity for RF Exposure
- Guidelines for Operating Cisco Aironet Access Points in Japan
- Administrative Rules for Cisco Aironet Access Points in Taiwan
- Operation of Cisco Aironet Access Points in Brazil
2-49
Cisco Aironet 1560 Series Outdoor Access Point Hardware Installation Guide
Chapter 2 Installing the Access Point
Powering the Access Point
Powering the Access Point
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Warning
This equipment must be externally grounded using a customer-supplied ground wire before power is
applied. Contact the appropriate electrical inspection authority or an electrician if you are uncertain
that suitable grounding is available.
Statement 366
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
The 1560 access point supports these power sources:
• DC power – 42- 57 VDC
• Power-over-Ethernet (PoE)
The 1560 access point can be powered via the PoE input from an in-line power injector or a suitably
powered switch port. Depending on the configuration and regulatory domain, the required power for full
operation is UPoE.
For the 1562I, UPoE powered switch port or a power injector is required for full operation of the 3x3
MIMO on the 2.4 GHz radio in the regulatory domains that allow for high 2.4 GHz transmit power
(Regulatory domains -A, -D, -F, -K, -N, -Q, -T, -Z). If the 1562I is powered by a PoE+ (802.3at power)
switch port then the access point will automatically disable one of the 2.4 GHz transmitters and the radio
will operate in 2x3 MIMO mode.
Table 2-9 AP 1560 Power Matrix
Model Configuration
Regulatory
Domain
Switch
Power
AIR-PWRINJ-60RGD1
AIR-PWRINJ-60RGD2
AIR-PWRINJ6
1
AD/DC Power Adapter
AIR-PWRADPT-RGD1
1562I 3x3:3 (2.4 GHz) A, B, D, I,
K, N, Q, T,
Z
UPOE Yes No Yes
3x3:3 (5 GHz)
3x3:3 (2.4 GHz) C, E, F, G,
H, L, M, R,
S
UPOE (Will be added
at FCS)
3x3:3 (5 GHz)
2x2:2 (2.4 GHz) A, B, C, D,
E, F, G, H,
I,
K, L, M,
N, Q, R, S,
T, Z
802.3at
PoE+
Yes
2x2:2 (5 GHz)
1562D 2x2:2 (2.4 GHz) A, B, C, D,
E, F, G, H,
I, K, L, M,
N, Q, R, S,
T, Z
802.3at
PoE+
Yes Yes Yes
2x2:2 (5 GHz)
1562E 2x2:2 (2.4 GHz)
2x2:2 (5 GHz)