User Guide

7-95
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Chapter 7 Maintaining the Router
Removing and Installing a Chassis
Step 5 Position one person in front of the chassis to support and guide it while the second
person slowly pushes the chassis to slide it off the rack-mounting table and onto
the scissor-jack platform.
Step 6 Install the four chassis anchor clips through the slots in the bottom of the chassis:
Warning One person should be holding the side of the chassis to prevent it from tipping.
a. Align the holes with the bolt holes in the platform.
b. Insert and tighten the four bolts to prevent the chassis from shifting on the
scissor-jack platform (
Figure 7-55).
Figure 7-55 Securing the Chassis to the Scissor-Jack Platform
Front of
chassis
29157