User Guide

78-11719-02 July 2001 Using Cisco Transport Controller 3
Cisco ONS 15327 User Documentation 3-31
3.9 Setting Up ONS 15327 Security
The ONS 15327 has four security levels that limit the functions you can perform: Retrieve,
Maintenance, Provisioning, and Superuser. A Retrieve user can retrieve and view CTC information
but cannot set or modify parameters. A Maintenance user can see Maintenance options only. A
Provisioning user can see only Provisioning and Maintenance options. A Superuser, usually the
network element administrator, can perform all of the functions of the other security levels and set
names, passwords, and security levels for other users. Table 3-11 shows a list of CTC actions that
can be performed at each security level.
Table 3-11 ONS 15327 Security Levels
CTC Tab Subtab Actions Retrieve Maintenance Provisioning Superuser
Alarms n/a Delete cleared alarms X X X X
History Session Read only
Node Retrieve X X X X
Circuits n/a Create/Delete/Edit/VLAN X X
Map X X X X
Provisioning General All X
EtherBridge All X X
Network Modify mask/IP/Route X
Protection Create/Delete/Edit X X
Browse groups X X X X
Security Create/Delete X
Change password same user same user same user X
SNMP Create/Delete/Edit X
Browse traps X X X X
Sonet DCC All X
Timing All X X
Alarming All X X
Inventory n/a Delete X X
Reset X X X
Maintenance Database Backup/Restore X
EtherBridge Read only
Protection Operation on protection
groups
XXX
Software Upgrade/Activate/Revert X
Diagnostic Retrieve X
Timing Read-only
Audit Retrieve X X X X
Routing
Table
Read Only
Condition n/a Retrieve X X X X