User Manual Part 6

Navini Networks, Inc. Ripwave Base Station I&C Guide

However, it will be unmanaged, as the EMS cannot communicate with the BTS.

Pinging EMS (172.16.0.10).................Done

A status message appears indicating that all DSPs have been downloaded and are now beginning

the initialization process:

Bootload is a success.....................Done

Initialization can take a significant period of time, with progress through the DSP initialization

shown by a growing string of “.” on this line. Initialization is complete with “Done” on this line,

and the configuration data is passed to the application entities on each device:

Initializing DSP(s).......................Done

Configuring LLC Bandwidth Management......Done

Configuring MAC Carrier Data..............Done

Configuring MAC Bandwidth Management......Done

Configuring Layer 1.......................Done

Configuring CPE Descriptor Table .........Done

The final step in the BTS initialization is to start up the GPS subsystem. With the GPS, the BTS

will remain time synchronized with the other BTSs in the network:

Configuring GPS...........................Done

The BTS is now provisioned with minimal data. This is enough data to be able to calibrate and

test the BTS. Power cycle the BTS for the changes to take place. An example of a reboot is

shown in Exhibit 11.

Exhibit 11: BTS Reboot - Example

!!!!! Shutdown Started. Terminating all interfaces!!!!!!

Stopping Ime..............................Done

Stopping Cme..............................Done

Stopping EtherBridge......................Done

Stopping CAM I/f..........................Done

Stopping Lpbk Proxy.......................Done

Stopping LLC Proxy........................Done

Stopping LLC I/f...........................Done

!!!!!!!!!!!! Shutdown Completed. Rebooting !!!!!!!!!!!!!

Attaching to TFFS... done.

Loading /tffs0/LOADS/btsb/core...5569208

Starting at 0x10000...

Auto-booting..............................Done

Starting File System......................Done

Mounting Drive /tffs0.....................Done

Mounting Drive /dev0......................Done

Mounting Drive /dev1......................Done

Starting TCP/IP Stack.....................Done

Starting ARP..............................Done