User's Manual

Navini Networks, Inc. Ripwave-MX Modem User Guide
Troubleshooting Using
Navini Diganostics
(NavDiag), continued
051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
he Configuration screen enables you to update your Modem’s
ftware if you are so directed by your Service Provider. If you
ust update your Modem’s software, your Service Provider will
rovide you with instructions regarding what to do.
he Allow Customer Satisfaction Reporting box gives you control
ver whether your Service Provider is allowed to monitor your
parameters evolve over time. With this screen, you can select up to
currently loaded in the “active side” and “standby side” of the
Modem’s flash memory.
The two letters in parenthesis following the release number
indicate the type of software load. JD indicates Joint Detection,
while EN indicates Enhanced Nulling.
On the left-hand side of the screen, there are five screen options:
Connection Status, Configuration, Trend Analysis, Statistics, and
About. The following screen will appear when you press the
Configuration button.
T
so
m
p
T
o
Modem using the remote CPE Logging function and to use your
computer to store the CPE log files created by this function. By
default, this box is checked which means the Service Provider can
monitor your Modem.
The Trend Analysis screen enables you to view how some Modem
20