Installation Guide

Navini Monitoring Software Installation
1. Navini Networks offers two types of monitoring software: Navini
Ripwave Monitor and Navini Diagnostics Tool. The Navini Ripwave
Monitor is available with software releases prior to Release 4 while the
Navini Diagnostics Tool is available with a software release of 4 or
greater. Before installing either the Navini Monitor or Navini
Diagnostics software, shut down all programs. This includes all anti-
virus software.
2. Insert the Navini Networks Ripwave Installation CD in the CD-ROM
drive.
3. Click Start > Run from the menu at the bottom left corner of your
screen. In the Run window, enter e:\setup (where “e” represents the CD
drive; use the letter representing your specific CD drive) in the Open
field. Click OK.
4. Follow the instructions given by the Navini Monitor Installation Wizard
or the Navini Diagnostics Installation Wizard to install the monitoring
software.
5. Restart the computer. When the system is up, log in to the computer and
open the Web browser.
6. LET IT RIP…BEGIN SURFING THE INTERNET!
Copyright
©
2001, 2002, 2003, 2004 Navini Networks, Inc. All rights reserved. Printed in the USA. Navini
Networks, Internet at the Speed of Thought, Zero-Install, Ripwave, and Unwired by Navini are trademarks of
Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service
marks of their respective owners.
Ripwave
™
Modem
Quick Installation Guide
Part Number 40-00098-00
Revision G Version 1.0
May 21, 2004