Installation Manual Part 1

PRELIMINARY
ix
BWX 8415 Basestation Installation and Commissioning Guide
OL-19519-01
About This Document
Purpose
This document provides a Cisco-qualified BWX Mobile WiMAX
TM
Installation & Commissioning
Technician or Field Engineer with instructions to properly install a BWX 8415 Basestation (BS). The
scope includes the Radio Unit (RU), Antenna Unit (AU), power and grounding, the backhaul network,
the Access Services Network-Gateway (ASN-GW) & Broadband Wireless Gateway (BWG), and all
cabling. It also includes acceptance testing procedures.
Warning For safety and compliance reasons, the installation and configuration described in this document
should be attempted only by persons who have completed appropriate training and achieved proper
technical certifications regarding the use and support of the applicable products. Incorrect
installation, configuration and/or service may lead to damage to the product(s) and/or risk of personal
injury, and may void your product warranty and/or entitlement to support services. You, the customer,
are responsible for obtaining and maintaining any required regulatory licenses, following
appropriate safety procedures, and providing adequately trained staff to perform any installation,
configuration and service of the products described herein.
Revision History
Terms
The information in this document pertains to the BWX Mobile WiMAX system. In this document and
all customer documents as of this release, when referring to the BWX Mobile WiMAX Basestation, the
term “BS” is used.
Date Revision/Version Contributors Editor Comments
10.30.09 -/01 PLM, Engineering J. Carrasco Release 10.0