Installation Manual Part 4
Table Of Contents
- Commissioning
- 7.1 Install the Element Management System (EMS)
- 7.2 Install Access Services Network Gateway (ASN-GW) Hardware and Broadband Wireless Gateway (BWG) Software
- 7.3 Add and Configure the BWG to the EMS Server
- 7.4 Authentication, Authorization, and Accounting (AAA) Server Installation
- 7.5 Add and Configure a BWX 8415 Basestation
- 7.6 Power Up and Provision the BWX 8415 Basestation
PRELIMINARY
7-16
BWX 8415 Basestation Installation and Commissioning Guide
OL-19519-01
Chapter 7 Commissioning
7.5.3 Configure a BWX 8415 Basestation
Figure 7-17 Enabling Advanced Operations for General Parameters (cont.)
Step 6 Update the necessary fields, to include: IP info, location, and contact personnel.
Step 7 Verify that the BTS High Temperature value is 25 (Celsius) and the BTS Shutdown High Temperature
value is 30 (Celsius).
Step 8 Click on Ok to accept the changes.
New fields are available
for modification.
New fields are available
for modification.
New fields are available
for modification.
Whenever you click on “Enable
Advanced Operat ions”a
warning screen like this one is
open ed .
Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.
Click here to go ba ck. Click here to go ba ck. Click here to go ba ck.
New fields are available
for modification.
New fields are available
for modification.
New fields are available
for modification.
New fields are available
for modification.
New fields are available
for modification.
New fields are available
for modification.
Whenever you click on “Enable
Advanced Operat ions”a
warning screen like this one is
open ed .
Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.
Whenever you click on “Enable
Advanced Operat ions”a
warning screen like this one is
open ed .
Whenever you click on “Enable
Advanced Operat ions”a
warning screen like this one is
open ed .
Whenever you click on “Enable
Advanced Operat ions”a
warning screen like this one is
open ed .
Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.Click on “Ye s” to proceed.
Click here to go ba ck. Click here to go ba ck. Click here to go ba ck. Click here to go ba ck. Click here to go ba ck. Click here to go ba ck. Click here to go ba ck. Click here to go ba ck. Click here to go ba ck.