Installation Manual Part 4

PRELIMINARY
7-17
BWX 8415 Basestation Installation and Commissioning Guide
OL-19519-01
Chapter 7 Commissioning
7.5.3 Configure a BWX 8415 Basestation
Figure 7-18 Updating Parameter Fields
Step 9 Click on Ok to continue.
Figure 7-19 Confirmation of Successful Configuration
Update the necessary fi elds.
This includes IP info, Location
and Contact Personnel.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Update the necessary fi elds.
This includes IP info, Location
and Contact Personnel.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Notice that now the three
buttons at the bottom of the
Screen are active. Click on
“Ok” to acce pt the ch an ges.
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Change the High
Temp values to 25
and 30 (Celsius).
Click on “Ok” to continue.Click on “Ok” to continue.Click on “Ok” to continue.