Installation Manual Part 4

PRELIMINARY
7-23
BWX 8415 Basestation Installation and Commissioning Guide
OL-19519-01
Chapter 7 Commissioning
7.5.3 Configure a BWX 8415 Basestation
Figure 7- 2 8 W 0 Ta b l e Ta b
Step 9 Click on Ok, at the bottom of the screen, to continue.
Step 10 Click on Yes in the warning boxes and click Ok to continue.
Figure 7-29 Layer 1 Warning Box
These parameters characterize
the g eom etry
of the BWX
Base station Antenna.
These parameters characterize
the g eom etry
of the BWX
Base station Antenna.
These parameters characterize
the g eom etry
of the BWX 8415
Basestation.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
Th e cor rect va lue s will be loaded from
the script supplied with the antenna.
Th e cor rect va lue s will be loaded from
the script supplied with the antenna.
Th e cor rect va lue s will be loaded from
th e fl ash memo ry with in t he BS.
These parameters characterize
the g eom etry
of the BWX
Base station Antenna.
These parameters characterize
the g eom etry
of the BWX
Base station Antenna.
These parameters characterize
the g eom etry
of the BWX 8415
Basestation.
These parameters characterize
the g eom etry
of the BWX
Base station Antenna.
These parameters characterize
the g eom etry
of the BWX
Base station Antenna.
These parameters characterize
the g eom etry
of the BWX 8415
Basestation.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
For Panel an tennas, the
values are different
for the
different a ntenna e leme nts,
but the pattern is rep eated
for each sub-carrier.
Th e cor rect va lue s will be loaded from
the script supplied with the antenna.
Th e cor rect va lue s will be loaded from
the script supplied with the antenna.
Th e cor rect va lue s will be loaded from
th e fl ash memo ry with in t he BS.
Th e cor rect va lue s will be loaded from
the script supplied with the antenna.
Th e cor rect va lue s will be loaded from
the script supplied with the antenna.
Th e cor rect va lue s will be loaded from
th e fl ash memo ry with in t he BS.
Click on “ Ok”. Click on “ Ok”. Click on “ Ok”. Click on “ Ok”.
Click on “Yes”. Click on “Yes”.
Click on “Yes”. Click on “Yes”.
Click on “ Ok”. Click on “ Ok”. Click on “ Ok”. Click on “ Ok”.
Click on “Yes”. Click on “Yes”.
Click on “ Ok”. Click on “ Ok”. Click on “ Ok”. Click on “ Ok”.
Click on “Yes”. Click on “Yes”. Click on “Yes”. Click on “Yes”.
Click on “Yes”. Click on “Yes”. Click on “Yes”. Click on “Yes”. Click on “Yes”. Click on “Yes”. Click on “Yes”. Click on “Yes”.