Installation Manual Part 4

PRELIMINARY
7-25
BWX 8415 Basestation Installation and Commissioning Guide
OL-19519-01
Chapter 7 Commissioning
7.5.3 Configure a BWX 8415 Basestation
Figure 7-31 Selecting the R6 Interface Parameters
Step 2 Select the BWG Name from the drop down menu.
Step 3 Set the Ping Option to Enable.
Step 4 Set the Keep Alive Option to Enable.
Step 5 Click on Ok, at the bottom of the screen, to continue.
Figure 7-32 Changing the R6 Interface Parameters
Click on this icon to open the “Mob ility” branch of the tree.
Click on “R6 Interface”.
In order to make changes, click on “C onfigure”.
Click on “Show Configuration”
to view the current R6 Interface
configuration.
Click on this icon to open the “Mob ility” branch of the tree. Click on this icon to open the “Mob ility” branch of the tree.
Click on “R6 Interface”. Click on “R6 Interface”.
In order to make changes, click on “C onfigure”. In order to make changes, click on “C onfigure”.
Click on “Show Configuration”
to view the current R6 Interface
configuration.
Click on “Show Configuration”
to view the current R6 Interface
configuration.
Set the Ping Option to Enable.
Cl i ck o n “Ok”. Cl i ck o n “Ok”. Cl i ck o n “Ok”.
Set the Keep Alive Option to Enable.
Select the BWG name
From the d rop down menu.
Set the Ping Option to Enable. Set the Ping Option to Enable.
Cl i ck o n “Ok”. Cl i ck o n “Ok”. Cl i ck o n “Ok”. Cl i ck o n “Ok”. Cl i ck o n “Ok”. Cl i ck o n “Ok”.
Set the Keep Alive Option to Enable. Set the Keep Alive Option to Enable.
Select the BWG name
From the d rop down menu.
Select the BWG name
From the d rop down menu.