Installation Manual Part 4
Table Of Contents
- Commissioning
- 7.1 Install the Element Management System (EMS)
- 7.2 Install Access Services Network Gateway (ASN-GW) Hardware and Broadband Wireless Gateway (BWG) Software
- 7.3 Add and Configure the BWG to the EMS Server
- 7.4 Authentication, Authorization, and Accounting (AAA) Server Installation
- 7.5 Add and Configure a BWX 8415 Basestation
- 7.6 Power Up and Provision the BWX 8415 Basestation
PRELIMINARY
7-27
BWX 8415 Basestation Installation and Commissioning Guide
OL-19519-01
Chapter 7 Commissioning
7.5.3 Configure a BWX 8415 Basestation
Step 2 Verify that the following default values are set for the CAC fields (refer to Figure 7-35):
Bw flag: Disabled
Bw oversubscription: 10
Cac enable : Enabled
List update interval: 6000
User inactive period: 3000
SF slot ration UL: 66
SF slot ration DL: 32
Figure 7-35 Verifying the Default Values for CAC Configure
Step 3 Click Ok in the Information box to continue.
Figure 7-36 CAC Information Boxes
Verify that the default values for
CAC Configure match those listed
in step 2.
Verify that the default values for
CAC Configure match those listed
in step 2.
Verify that the default values for
CAC Configure match those listed
in step 2.
Verify that the default values for
CAC Configure match those listed
in step 2.
Click on “Ok”. Click on “Ok”. Click on “Ok”.