Installation Manual Part 4

Table Of Contents

PRELIMINARY

7-32

BWX 8415 Basestation Installation and Commissioning Guide

OL-19519-01

Chapter 7 Commissioning

7.6.2 BWX 8415 Basestation Bootup

Example 7-5 Continuation of the Boot Process (NEED NEW BOOT SEQUENCE SCREENSHOTS)

Starting BTS L3IfAgent....................Done

Initializing BTS L2 MemPools .............Done

Initializing BTS MacSys...................Done

Initializing RM Helper....................Done

Initializing Mac Resource.................Done

Initializing BTS UCD/DCD Manager..........Done

Initializing BTS Ranging Manager..........Done

Initializing UL MgmtMsg Processor.........Done

Initializing BTS DSx Msg Manager..........Done

Initializing BTS CS Processor.............Done

Initializing BTS MSS Manager..............Done

Initializing BTS CID Manager.............Done

Initializing BTS PDU Processor............Done

Initializing BTS PHY Processor............Done

Initializing BTS SF Manager...............Done

Starting BTS L2AUTHENTICATOR TASK.....................Done

Starting BTS L2 OAM.......................Done

Initializing BTS NBR_ADV Manager..........Done

Starting MakeInstance

Done

Starting BtsL2L3If................Done

Starting BTS L2MAC Rx.....................Done

Starting CDI Nero.........................Done

Starting EtherBridge......................Done

Starting ARP FSM..........................Done

Starting ARP..............................Done

Starting Dpf..............................Done

Starting RME..............................Done

BootlineMask = 5f

EnableFlag = ffc003

Starting PHY Processing...................Done