User's Manual

Navini Networks, Inc. Ripwave Base Station I&C Guide
132
Step 4. Take a marker measurement on the Spectrum Analyzer by using the ‘marker to peak’
or the ‘peak search’ function. The screen on the Spectrum Analyzer should look similar
to the one shown in Figure K8.
Figure K8: RFS Only Tx Marker Measurement Example
• Connect the Signal Generator to
the first Antenna Element Port
• Connect the Spectrum Analyzer
to the Cal Port
• Connect the Power & Data Cable
to the Test Box
Signal Generator
Spectrum Analyzer
Test Box
• Connect the Signal Generator to
the first Antenna Element Port
• Connect the Spectrum Analyzer
to the Cal Port
• Connect the Power & Data Cable
to the Test Box
Signal Generator
Spectrum Analyzer
Test Box