User's Manual

Navini Networks, Inc. Ripwave Base Station I&C Guide

Starting WDB Tools........................Done

This starts the actual interface for the console command interface:

Starting Target Shell.....................Done

The BTS is equipped with a rich suite of logs that are automatically collected for analysis by

Navini developers in the unlikely event a crash occurs. This line item invokes the automatic log

collection:

Initializing System Logger................Done

The core software is separated into operating system initialization and Ripwave application

software that provides OAM and bridging functionality. This line item identifies the transition

point from OS initialization to the point where the OS begins spawning application level tasks:

Starting Application......................Done

The next task provides an interface to the Logical Link Control (LLC) on the MDM card and

forms a conduit for all message and user traffic from the CC to MDM card.

Starting LLC I/f..........................Done

A Command and Debug Interface is initialized to extend rudimentary target shell capabilities for

Navini developers to diagnose problems with the Digital Signal Processors on the MDM and

CHP cards:

Starting CDI..............................Done

The Content Addressable Memory (CAM) is used to provide mappings of users to channels. This

mapping interface is started at this point:

Starting CAM I/f..........................Done

The management entity for Modem mobility, nomadicity, and access control security is handled

by the MME application that is started at this point:

Starting MME..............................Done

The protocol bridging performed by the BTS for user traffic is handled by the EtherBridge

component. Depending on the traffic mode selected, the EtherBridge will perform varying