User's Manual

Navini Networks, Inc. Ripwave Base Station I&C Guide
153
18. When finished, remove the Modem from the roof and secure equipment for travel.
19. Drive to the next location selected on the RF coverage analysis. Stop, and turn off the
vehicle.
20. Repeat steps 7 to 19 until all locations are tested. At this point send this data to the RF
Engineers to analyze, or continue until each quadrant in the cell is complete. When you
send the results depends upon the schedule or results from the file transfers.
Location (FTP) Test Form
The form for recording the Location (FTP) test results is an Excel spreadsheet. Shown in Table
T1, the actual column headers go across the top of the form, but are broken into two sections
here for readability.
Table T1: Location (FTP) Test Form