User's Manual

Navini Networks, Inc. Ripwave Base Station I&C Guide
32
Phase III: Commissioning, continued
15 - Install & configure the Customer EMS
Server & Client.
C
B
16 – Configure BTS in the Customer EMS
19 - Perform calibration. Ensure successful
results 3 times.
Yes
17 - Enter the RFS configuration by running the
RFS script that shipped with the antenna
equipment.
18 – Verify EMS & BTS connectivity. Verify
that the latency between EMS and BTS is less
than 10 milliseconds
14 -Was the
Test EMS used?
No