User's Manual
Table Of Contents
- Export BTS Data
- Perform the Calibration Verification Procedure
- Single Antenna Element Test
- Install & Test Customer EMS Operations
- Perform Calibration Using Customer’s EMS
- Verify System Performance
- Verify System Operation With Multiple Modems
- Back Up EMS Database
- Customer Acceptance
- Appendix C: BTS Specifications
- Appendix G: Sample Base Station Drawing
- Appendix H: Antenna Power & Cable Selection
Navini Networks, Inc. Ripwave Base Station I&C Guide
107
An excel program (P/N 40-00219-00) is provided to perform all the necessary calculations
automatically
Data Input
The Cable selection procedure requires the following data to be entered in the green fields of the
spreadsheet:
Figure H1 – Data Input
Operating Frequency Band – Select one of the following:
2.3 GHz (6 sub-carriers)
2.3 GHz (10 sub-carriers)
2.4 GHz (combo chassis)
2.5 GHz
2.6 GHz (split chassis)
2.6 GHz (combo chassis)
Regulatory Body:
FCC, European, or Other
Type of RFS
:
Omni or Panel
Active or Passive
Units
:
US or Metric (that is: lb/ft/in or kg/m/cm)