User's Manual
Table Of Contents
- Export BTS Data
- Perform the Calibration Verification Procedure
- Single Antenna Element Test
- Install & Test Customer EMS Operations
- Perform Calibration Using Customer’s EMS
- Verify System Performance
- Verify System Operation With Multiple Modems
- Back Up EMS Database
- Customer Acceptance
- Appendix C: BTS Specifications
- Appendix G: Sample Base Station Drawing
- Appendix H: Antenna Power & Cable Selection
Navini Networks, Inc. Ripwave Base Station I&C Guide
119
TABLE H5 – Cable Specs
TABLE H6 – Antenna Power and Rx Sensitivity
WARNING! The maximum values showed in this table are capabilities of the
hardware. Stringent regulatory restrictions may apply depending on the country where
the equipment is being installed. Check the applicable regulations of the country's
regulatory body for compliance. The maximum Antenna Power can also be limited by
antenna cable loss and filtering requirements depending on regulatory body.
Cable Loss
dB/ft
(dB/m)
Bundled Individual
0.100
(0,328)
2.01 GHz
QMA (RA)
N-type (ST)
N-type (ST)
QMA (RA)
QMA (ST)
N-type (RA)
N-type (ST)
N-type (RA)
N-type (ST)
N-type (RA)
N-type (ST)
0.109
(0,358)
2.3 GHz
2.4 GHz
2.5–2.7 GHz
3.4–3.7 GHz
RG6 RG11 LMR-240 LMR-400 LMR-600
Type of Connectors
(RA: Right Angle
ST: Straight)
0.111
(0,364)
0.116
(0,380)
0.138
(0.453)
0.064
(0,210)
0.071
(0,233)
0.073
(0,239)
0.075
(0,246)
0.088
(0,289)
0.116
(0,379)
0.123
(0,405)
0.126
(0,413)
0.132
(0,431)
0.155
(0,509)
0.060
(0,197)
0.070
(0,230)
0.068
(0,223)
0.070
(0,230)
0.083
(0,272)
0.039
(0,128)
0.044
(0,144)
0.044
(0,144)
0.046
(0,151)
0.055
(0,180)
75 Ohm 50 OhmImpedance
Weight: lb/ft (kg/m)
0.45 (0.67) 0.85 (1.26) 0.034 (0.05) 0.068 (0.10) 0.131 (0.20)
Min. Bend Radius: in (mm)
22 (560) 32 (813) 0.75 (19) 1.0 (25) 6.0 (152)
Cable Loss
dB/ft
(dB/m)
Bundled Individual
0.100
(0,328)
2.01 GHz
QMA (RA)
N-type (ST)
N-type (ST)
QMA (RA)
QMA (ST)
N-type (RA)
N-type (ST)
N-type (RA)
N-type (ST)
N-type (RA)
N-type (ST)
QMA (RA)
N-type (ST)
N-type (ST)
QMA (RA)
QMA (ST)
N-type (RA)
N-type (ST)
N-type (RA)
N-type (ST)
N-type (RA)
N-type (ST)
0.109
(0,358)
2.3 GHz
2.4 GHz
2.5–2.7 GHz
3.4–3.7 GHz
RG6 RG11 LMR-240 LMR-400 LMR-600RG6 RG11 LMR-240 LMR-400 LMR-600
Type of Connectors
(RA: Right Angle
ST: Straight)
0.111
(0,364)
0.116
(0,380)
0.138
(0.453)
0.064
(0,210)
0.071
(0,233)
0.073
(0,239)
0.075
(0,246)
0.088
(0,289)
0.116
(0,379)
0.123
(0,405)
0.126
(0,413)
0.132
(0,431)
0.155
(0,509)
0.060
(0,197)
0.070
(0,230)
0.068
(0,223)
0.070
(0,230)
0.083
(0,272)
0.039
(0,128)
0.044
(0,144)
0.044
(0,144)
0.046
(0,151)
0.055
(0,180)
75 Ohm 50 OhmImpedance
Weight: lb/ft (kg/m)
0.45 (0.67) 0.85 (1.26) 0.034 (0.05) 0.068 (0.10) 0.131 (0.20)
Min. Bend Radius: in (mm)
22 (560) 32 (813) 0.75 (19) 1.0 (25) 6.0 (152)
Antenna Power
(dBm)
Rx Sensitivity
(– dBm)
2.3 GHz
2.4 GHz
2.5–2.7 GHz
3.4–3.7
GHz
min MAX min MAX
20 30 –95 –75
10 24 –85 –65
20 30 –95 –75
20 29 –90 –70
min MAX min MAX
20 30 –95 –75
10 24 –85 –65
20 30 –95 –75
Antenna Power
(dBm)
Rx Sensitivity
(–dBm)
TTA Systems Non-TTA Systems
Antenna Power and Rx Sensitivity
with filter
without filter
20 30 –90 –70
Antenna Power
(dBm)
Rx Sensitivity
(– dBm)
2.3 GHz
2.4 GHz
2.5–2.7 GHz
3.4–3.7
GHz
min MAX min MAX
20 30 –95 –75
10 24 –85 –65
20 30 –95 –75
20 29 –90 –70
min MAX min MAX
20 30 –95 –75
10 24 –85 –65
20 30 –95 –75
Antenna Power
(dBm)
Rx Sensitivity
(–dBm)
TTA Systems Non-TTA Systems
Antenna Power and Rx Sensitivity
with filter
without filter
20 30 –90 –70