User's Guide

Navini Networks, Inc. Ripwave-MX Modem User Guide

Connecting and

Disconnecting the HD-

EBP, continued

050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)

Heavy Duty

xternal Battery

ack (HD-EBP)

The Indicator Lig

on the

Step Action Illustration

6. Plug the HD-EBP’s pig-

tail cord into the power

slot on the Modem.

7. To remove the battery

pack from the Modem,

unplug the pig-tail cord.

Depress the front button

on the HD-EBP. Lift the

Modem off of the

battery pack.

he HD-EBP has one indicator light T that resides on the back end of

ry is not connected to a Modem or to the battery

but the Modem is off

and the Modem is on

Light is green when the battery is on and fully charged.

Light is amber when the battery has power but is no longer

fully charged. If the battery is connected to the battery charger,

an amber light means the battery is being charged.

Light is red when the battery is low on power. When the

battery is low, it has approximately 15% of its charge left.

the unit near the pig-tail cord. This light has four states associated

with it. The states are described below.

 Light is off when any of the following apply:

• The batte

charger

• The battery is connected to a Modem

but the battery is empty of power

