TABLE OF CONTENTS PERMISSIONS, TRADEMARKS & DISTRIBUTION.............................................................................3 SAFETY .......................................................................................................................................................4 REGULATORY INFORMATION ..............................................................................................................5 BATTERY PRECAUTIONS...............................................................
Ripwave Modem User Guide Navini Networks, Inc. CARE & MAINTENANCE .....................................................................................................................50 UPGRADING THE MODEM .................................................................................................................51 ™ ADDENDUM 1: RIPWAVE MODEM - PC TROUBLESHOOTING............................................52 ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................
Navini Networks, Inc. Ripwave Modem User Guide Permissions, Trademarks & Distribution Copyright© 2001 - 2005, Navini Networks, Inc. All information contained herein and disclosed by this document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein.
Ripwave Modem User Guide Navini Networks, Inc. Safety When using Navini Ripwave electronic equipment, always follow basic safety precautions to reduce the risk of electrical shock, fire, and injury to people and/or property. Follow all warnings and instructions that come with the equipment. 1. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the equipment to water could cause severe electrical shock or serious damage to the equipment. 2.
Navini Networks, Inc. Ripwave Modem User Guide Regulatory Information FCC Notice CAUTION: This device is a Radio Frequency transmitter. It is required to comply with FCC RF exposure requirements for transmitting devices. For all LED Modems and all LCD Modems except for the 2.6 LCD with window mount, a minimum separation distance of 8 inches (20 cm) or more must be maintained between the antenna and all persons during device operations to ensure compliance with the FCC’s rules for Radio Frequency Exposure.
Ripwave Modem User Guide Navini Networks, Inc. Battery Precautions CAUTION! To reduce risk of injury or fire, follow these instructions when handling the battery. 1. Risk of explosion is possible if the battery is replaced with one not supplied by Navini Networks. 2. Do not dispose of the battery in a fire. They may explode. Check with the local codes for battery disposal guidelines. 3. Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or harmful to humans.
Navini Networks, Inc. Introduction Package Inventory Ripwave Models Ripwave Modem User Guide Congratulations! The Ripwave Modem is a user-friendly, easy-toinstall device that helps you connect wirelessly to the Internet. It provides complete broadband Internet access to residential and small office/home office (SOHO) customers without the necessity of professional hardware installation.
Ripwave Modem User Guide Operating Frequencies Navini Networks, Inc. Modem 2.3 GHz LED 2.4 GHz LED 2.4 GHz LCD 2.5 GHz LED 2.5 – 2.7 GHz LCD 2.6 GHz LED 3.4 GHz LED 3.4 GHz LCD 3.5 GHz LED 3.5 GHz LCD Model Frequency Range Operating Band 2300E/U 2.305 GHz – 2.385 GHz WCS+ 2400 E/U 2.400 GHz – 2.483 ISM 2400-2483 LCD E/U 2.400 GHz – 2.483 GHz ISM 2500 E/U 2.500 GHz – 2.596 GHz MMDS/ITFS 2.5-2.6 LCD E/U 2.500 GHz – 2.686 GHz MMDS/ITFS 2600 E/U 2.596 GHz – 2.
Navini Networks, Inc. Minimum Computing Requirements Ripwave Modem User Guide Ethernet Modems: Any Win32 Operating System (OS) - Windows 952, Windows NT, Windows 983, Windows 98SE3, Windows 2000, Windows ME3, Windows XP4, or later version. USB Modems: Windows 98SE3, Windows 2000, Windows ME3, Windows XP4,5,6, or later version. General Information: Ensure that the pc network port is enabled.
Ripwave Modem User Guide Physical Characteristics Navini Networks, Inc. The 2.4 GHz Ripwave Modem varies in some aspects from the 2.3, 2.5, 2.6, 3.4 and 3.5 Modems. As well, the Ethernet connection on any model varies from a USB connection. Notice the differences highlighted in the photos below and on the following page. 2.4 GHz LED Ripwave Modem 10 050503_pv1.1_Ripwave Modem User Guide_40-00097-00j(4.
Navini Networks, Inc. Physical Characteristics, continued Ripwave Modem User Guide 2.3, 2.5, 2.6, 3.4 & 3.5 GHz LED Ripwave Modems 0500503_pv1.1_Ripwave Modem User Guide 40-00097-00j(4.
Ripwave Modem User Guide Physical Characteristics, continued 12 Navini Networks, Inc. LCD Ripwave Modems (2.4, 2.5-2.7, 3.4, & 3.5 GHz) 050503_pv1.1_Ripwave Modem User Guide_40-00097-00j(4.
Navini Networks, Inc. Installing an Ethernet Modem (See, also, Addendum 1) Ripwave Modem User Guide The following instructions are for the installation of a Ripwave Modem that has a Ethernet connection. Please read all instructions before attempting the installation. It is advisable to turn off the computer and the Ripwave Modem before performing the installation. Step Action 1. Connect the Ethernet cable to the Ethernet port on the computer. 2.
Ripwave Modem User Guide Installing an Ethernet Modem, continued Navini Networks, Inc. Step Action 4. Rotate the antenna on the Ripwave Modem clockwise 180 degrees to the UP position. This reveals the Ripwave Modem indicator lights. 5. 6. CAUTION! Rotation or movement of the antenna in any other direction may cause damage to the Ripwave Modem. Turn the Modem ON. On the 2.4 GHz modem, do this by flipping the On/Off switch to the up position. On all other models, push the On/Off button in.
Navini Networks, Inc. Ripwave Modem User Guide Installing Navini Monitor” section of this manual. Installing a USB Modem (See, also, Addendum 1) The following instructions are for the installation Ripwave Modem that has a USB connection. Please read all instructions before attempting the installation. It is advisable to turn off the computer and the Ripwave Modem before performing the installation. Note: The screenshots shown in these instructions were taken from a laptop with Windows 2000.
Ripwave Modem User Guide Installing a USB Modem, continued Navini Networks, Inc. Step Action Illustration (using LED Modem) 3. Connect the AC power adapter cable to the back of the Ripwave Modem. Plug the other end of the cable into a 110/220 VAC, 60/50 Hz outlet. 4. CAUTION! Only use the AC power adapter specifically supplied with the Ripwave Modem. Using any other adapter may cause damage to the Modem. Rotate the antenna on the Ripwave Modem 180 degrees to the UP position.
Navini Networks, Inc. Installing a USB Modem, continued Ripwave Modem User Guide Step Action Illustration 6. If the green Power LED lights, proceed to Step 7. (On an LCD Modem, the display turns on.) If not, there is a problem with the Modem or the AC Power Adapter. Check all cables for proper connection. If there is still a problem, contact the supplier who gave you the package. 7. Turn your computer ON and log in. 8.
Ripwave Modem User Guide Installing a USB Modem, continued Navini Networks, Inc. Step Action 9. The Add New Hardware Wizard dialog box appears. Click Next to continue. 10. 11. 12. 18 Insert the Ripwave Installation CD into the computer’s CD-ROM drive. Select the ‘Search for the best driver for your device’ option. Click Next to continue. Select the ‘CD-ROM drive’ checkbox. Click Next to continue. Illustration Windows 2000 Screen Windows 2000 Screen Windows 2000 Screen 050503_pv1.
Navini Networks, Inc. Installing a USB Modem, continued Ripwave Modem User Guide Step Action 13. Confirm that the drive location is correct (it may be different than the one shown in the illustration). The file to be installed should say ‘NETNNUSB.INF”. Click Next to continue 14. 15. 16. Windows will finish installing the software files required for the Ripwave Modem operation. Click Finish. NOTE: For Window 98, a window may appear asking for drivers to be installed from the Windows 98 setup disk.
Ripwave Modem User Guide Navini Networks, Inc. Accessing the Internet With your Modem now installed, and both the Modem and computer power on, you should be able to surf the Internet! To access the Internet, open the web browser that is installed on your computer. Troubleshooting After installation, if you are experiencing difficulties with your Internet connection, please review the Minimum Computing Requirements and Addendum 1 to ensure your computer meets those requirements.
Navini Networks, Inc.
Ripwave Modem User Guide Installing Navini Ripwave Monitor (NavMon) Navini Networks, Inc. Navini’s monitoring software (Navini Ripwave Monitor or Navini Diagnostics) provides two types of information: signal strength and quality of the incoming signal. It also can provide information about the connectivity to the Service Provider’s network. These displays may be required when troubleshooting Modem problems.
Navini Networks, Inc. Installing Navini Ripwave Monitor (NavMon), continued Ripwave Modem User Guide Step Action Illustration 3. At the bottom left-hand corner of your screen, Windows 2000 Screen click Start > Run. In the Run window, enter e:\setup in the Open field (where “e” represents the CD drive). Use whatever letter represents your CD drive. Click OK to continue. 4. The InstallAnywhere window appears. The Windows 2000 Screen progress bar indicates that InstallAnywhere has initialized. 5. 6.
Ripwave Modem User Guide Installing Navini Ripwave Monitor (NavMon), continued Navini Networks, Inc. Step Action 7. The Ripwave Positioning screen appears. Read the screen for positioning the Ripwave Modem for optimum performance. Click Next to continue. 8. The Choose Install Folder screen appears. Enter the name of the folder where you wish to install the software. Click Next to continue.
Navini Networks, Inc. Installing Navini Ripwave Monitor (NavMon), continued Ripwave Modem User Guide Step Action 10. The Installing screen will display as the application files are loaded. 11. 12. At the Install Complete screen, click Done to close the window. After clicking Done the System Settings Change window appears, asking if you want to restart your computer now. Click Yes.
Ripwave Modem User Guide Troubleshooting Using Navini Ripwave Monitor (NavMon) Navini Networks, Inc. To open the NavMon software application, click on the “Start” button and select Programs→Navini Ripwave Monitor→Ripwave Monitor. The Navini Ripwave Monitor icon will appear in the toolbox tray of your computer. Double-click on this icon. A window with icons and, provided your Modem is on, bar graphs, will pop up.
Navini Networks, Inc. Troubleshooting Using Navini Ripwave Monitor (NavMon), continued Ripwave Modem User Guide The icons represent the PC, the connection between the PC and the Modem, the Modem, the connection between the Modem and the Base Station, and the Base Station with which the Modem is communicating.
Ripwave Modem User Guide Troubleshooting Using Navini Ripwave Monitor (NavMon), continued Navini Networks, Inc. If you make a service call to your Service Provider, the Technician may ask you to read the numbers to the right of the signal bar graphs. These will help the Technician to evaluate the best position for your Ripwave Modem. The Battery Strength bar graph and the number to the right of it indicate how much charge is left in the battery. Not all Modems have the battery option.
Navini Networks, Inc. Ripwave Modem User Guide Troubleshooting Using Navini Ripwave Monitor (NavMon), continued The features of the Advanced and Run Tests buttons are to be used in conjunction with your Service Provider Technician to resolve problems. There is no need to use these features unless you are experiencing problems with the Modem. 0500503_pv1.1_Ripwave Modem User Guide 40-00097-00j(4.
Ripwave Modem User Guide Uninstalling Navini Ripwave Monitor (NavMon) Navini Networks, Inc. If for some reason you need to uninstall the Navini Ripwave Monitor software, e.g., to upgrade your Operating System software, follow the procedure below. Note: The screen shots shown in these instructions were taken from a laptop with Windows 2000. If you have a Windows 98, XP, or ME operating system, the screens you see may vary from the screens shown in the instructions. Step Action 1.
Navini Networks, Inc. Ripwave Modem User Guide Uninstalling Navini Ripwave Monitor (NavMon), continued Step Action Illustration 4. Restart the PC to complete the uninstall process. This will ensure it functions properly after uninstalling. Installing Navini Diagnostics (NavDiag) If your Ripwave Modem has a software release prior to 4.0, you have the Navini Monitor software and not the Navini Diagnostics. Note: The screenshots shown in these instructions were taken from a laptop with Windows 2000.
Ripwave Modem User Guide Installing Navini Diagnostics (NavDiag), continued Navini Networks, Inc. Step Action Illustration 5. The InstallAnywhere Windows 2000 Screen window appears. The progress bar indicates that InstallAnywhere has initialized. 6. 7. 8. The Navini Diagnostics Windows 2000 Screen Language screen appears*. Select a language and click OK to continue. *NOTE: Your version of NavDiag may automatically attempt to match whatever language is set on your PC under Regional Options.
Navini Networks, Inc. Ripwave Modem User Guide option, and click Next to continue. NOTE: If the License Agreement is not accepted, you cannot install the software. 10. The Choose Install Folder screen appears. Enter the name of the folder where you wish to install the software. Click Next to continue. Windows 2000 Screen NOTE: The default installation folder provided by the software is shown in the illustration. 11. The Choose Shortcut Folder screen appears.
Ripwave Modem User Guide Installing Navini Diagnostics (NavDiag), continued Troubleshooting Using Navini Diagnostics (NavDiag) Navini Networks, Inc. Step Action 13. The Installing screen will display as the application files are loaded. 14. At the Install Complete screen, click Done to close the window. Illustration Windows 2000 Screen To open the Navini Diagnostics software application, double-click on the Navini Diagnostics icon on your desktop. Navini Diagnostics.
Navini Networks, Inc. Troubleshooting Using Navini Diagnostics (NavDiag), continued Ripwave Modem User Guide The icons represent the PC, the connection between the PC and the Modem, the Modem, the connection between the Modem and the Base Station, and the Base Station to which the Modem is communicating. Check marks over the connections indicate working connections.
Ripwave Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued Navini Networks, Inc. The Signal Quality bar area graphically represents the Signal-toNoise Ratio (SNR) of the downlink access code channel (ACC) received by the Modem. Again, the SNR is represented by a group of colored bars. The higher the pile of bars goes, the better the SNR of the signal. The color of the bars also gives an indication of the quality of the signal. Green lines indicate a high SNR.
Navini Networks, Inc. Troubleshooting Using Navini Diganostics (NavDiag), continued Ripwave Modem User Guide The two letters in parenthesis following the release number indicate the type of software load. JD indicates Joint Detection, while EN indicates Enhanced Nulling. On the left-hand side of the screen, there are five screen options: Connection Status, Configuration, Trend Analysis, Statistics, and About. The following screen will appear when you press the Configuration button.
Ripwave Modem User Guide Navini Networks, Inc. Troubleshooting Using Navini Diganostics (NavDiag), continued By pressing the Plot Graph button, the following screen will appear. This screen displays the value of the selected parameters over the last five minutes, updated once every second. The graphic scrolls from right to left. To view the Statistics screen, press the Statistics button. The statistics screen enables you to view the current value of selected parameters.
Navini Networks, Inc. Ripwave Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued The About screen provides vital information such as the version of the Navini Diagnostics software currently installed in your computer. It also provides a website address and telephone number where you can contact your Service Provider. To view the About screen, press the About button. An example of the About screen follows.
Ripwave Modem User Guide Uninstalling Navini Diagnostics (NavDiag) Navini Networks, Inc. If for some reason you need to uninstall the Navini Diagnostics software, e.g., to upgrade your Operating System software, follow the procedure below. Note: The screen shots shown in these instructions were taken from a laptop with Windows 2000. If you have a Windows 98, XP, or ME operating system, the screens you see may vary from the screens shown in the instructions. Step Action 1.
Navini Networks, Inc. Uninstalling Navini Diagnostics (NavDiag), continued Ripwave Modem User Guide Step Action 4. The Uninstall Complete screen appears when finished. Click on Quit to close the Uninstall screen. 5. Optional Batteries Illustration Windows 2000 Screen Restart the PC to complete the uninstall process. This will ensure the uninstall process completes successfully.
Ripwave Modem User Guide 2.4 GHz Battery Navini Networks, Inc. Step Action Squeeze both tabs to 1. remove or install the battery pack cover. Note that the cover is not used when the battery pack is installed in the Modem. Install the battery pack 2. into the Ripwave Modem, ensuring that the contacts on the battery pack mate with the contacts in the Modem and that both slides snap down securely. Reinstall the battery 3. pack cover on the Modem. To charge the battery, 4.
Navini Networks, Inc. 2.3 GHz, 2.5 GHz, 2.6 GHz, & 3.5 GHz Battery Ripwave Modem User Guide Step Action 1. Applying light pressure, push the tab on the battery pack cover to remove it from the bottom of the Modem. 2. Install the battery pack into the Modem, ensuring that the contacts mate and that both sides snap down securely. 3. 4. Illustration Reinstall the battery pack cover on the Modem. To charge the battery, connect the AC adapter to the Modem and to an AC power source.
Ripwave Modem User Guide Optional External Battery Packs Navini Networks, Inc. The external batteries are not installed inside the Modem. Instead they are connected to the Modem. Before we discuss how to connect and charge the external battery packs, let’s discuss the differences between the Standard External Battery Pack (S-EBP) and the Heavy Duty External Battery Pack (HD-EBP). The S-EBP can be used with any of the LED or LCD Modems. The HD-EBP can be used with all LED and LCD Modems except for the 2.
Navini Networks, Inc. Ripwave Modem User Guide The Indicator Light on the Standard External Battery Pack (S-EBP) The S-EBP has one indicator light that resides on top of the unit. This light has four states associated with it. The states are described below.
Ripwave Modem User Guide Connecting and Disconnecting the Heavy Duty External Battery Pack (HD-EBP) For LED Modems Navini Networks, Inc. If you have a HD-EBP, the battery pack is installed in the bottom of the Ripwave Modem. The bottom of the LED Ripwave Modem varies from the bottom of the LCD Modem. To install and or remove the battery pack, follow the steps based on your model of Modem. Step Action 1. Remove the cover from the bottom of the LED Modem. 2. 3. 4. 5.
Navini Networks, Inc. For LED Modems, continued Ripwave Modem User Guide Step Action 6. Press firmly down on the Modem so that the Modem firmly connects with the HD-EBP. 7. Plug the HD-EBP’s pigtail cord into the power slot on the Modem. 8. For LCD Modems Illustration To remove the battery pack from the Modem, unplug the pig-tail cord. Depress the front button on the HD-EBP. Lift the Modem off of the battery pack. Step Action 1.
Ripwave Modem User Guide For LCD Modems, continued 48 Navini Networks, Inc. Step Action 2. Place the back slot of the LCD Modem over the back prong of the HD-EBP. 3. Place the front part of the opening on the LCD Modem over the front prong on the battery. 4. Release the button on the battery. 5. Press firmly down on the Modem so that the Modem firmly connects with the HD-EBP. 6. Plug the HD-EBP’s pigtail cord into the power slot on the Modem. 7.
Navini Networks, Inc. Ripwave Modem User Guide The Indicator Light on the Heavy Duty External Battery Pack (HD-EBP) The HD-EBP has one indicator light that resides on the back end of the unit near the pig-tail cord. This light has four states associated with it. The states are described below.
Ripwave Modem User Guide Care & Maintenance Navini Networks, Inc. The Ripwave Modem is designed to give years of trouble-free service. To ensure operation, read the following care and maintenance instructions. Keep the Modem free of dust and moisture. If the Modem gets wet, use a towel to dry it immediately. Handle the Modem gently. Dropping it or mishandling it can cause damage to the plastic shell or the electronic circuitry. Keep the Modem away from high temperatures.
Navini Networks, Inc. Upgrading the Modem Ripwave Modem User Guide There are three different ways to upgrade the software that makes the Modem work. Your Service Provider may perform an over-the-air (OTA) upgrade, where the up-to-date software files are transferred wirelessly from the Base Station to your Modem. Your Service Provider may provide a downloadable web file or CD-ROM with software to be installed on your PC and used to upgrade the Modem.
Ripwave Modem User Guide Navini Networks, Inc. ADDENDUM 1: Ripwave™ Modem - PC Troubleshooting - For Use With All Ripwave Modems, Navini Ripwave Monitor Software, and Navini Diagnostics Software PC Operating Systems Prior to installing the Navini Ripwave Monitor or Navini Diagnostics software, please check to insure that the PC Operating System meets the criteria given in the table below. If these criteria are not met, unpredictable problems may occur as a result of installation.
Navini Networks, Inc. Ripwave Modem User Guide Ethernet Interface The Ethernet Modem may be connected to a PC via an Ethernet connection. Also, it is possible to connect multiple PC devices to a single Modem. The multi-PC configuration is transparent to the PC users and is analogous to a multi-PC configuration on a normal Ethernet LAN. Check with your Service Provider if multiple IP addressing is required for your particular configuration.
Ripwave Modem User Guide Navini Networks, Inc. Results of Correct Navini Monitor Installation Experienced PC users can check the results of the Navini Ripwave Monitor installation by looking at the log file that is created during the installation process. The log file is named “Ripwave_Monitor_InstallLog.log.” It is located under c:\Program Files\Navini Ripwave Monitor. ------Install Begin: Tue Jul 20 12:06:49 CDT 2004 Install End: Tue Jul 20 12:06:58 CDT 2004 Created with Zero G's InstallAnywhere 4.5.
Navini Networks, Inc. Ripwave Modem User Guide Status: SUCCESSFUL Install File: C:\Program Files\Navini Ripwave Monitor\UninstallerData\Uninstall inst.exe Status: SUCCESSFUL Install File: C:\Program Files\Navini Ripwave Monitor\UninstallerData\Uninstall inst.lax Status: SUCCESSFUL Install Directory: C:\Program Files\Navini Ripwave Monitor\UninstallerData\resource\ Status: SUCCESSFUL Additional Notes: NOTE - Directory already existed Install File: C:\Program Files\Navini Ripwave Monitor\UninstallerDat
Ripwave Modem User Guide Navini Networks, Inc. Install Directory: C:\Documents and Settings\All Users\Start Menu\Programs\Navini Ripwave Monitor\ Status: SUCCESSFUL Additional Notes: NOTE - Directory already existed Create Shortcut: Monitor.lnk C:\Documents and Settings\All Users\Start Menu\Programs\Navini Ripwave Monitor\Ripwave Status: SUCCESSFUL Create Shortcut: C:\Documents and Settings\All Users\Start Menu\Programs\Navini Ripwave Monitor\Uninstall Ripwave Monitor.
Navini Networks, Inc. Ripwave Modem User Guide 0 NONFATAL ERRORS 0 FATAL ERRORS Action Notes: None. Install Log Detail: Check Disk Space: C:\Program Files\NavDiag Status: SUCCESSFUL Additional Notes: NOTE - Required Disk Space: 29,363,315; Free Disk Space: 30,806,179,840 Install Directory: C:\Program Files\NavDiag\ Status: SUCCESSFUL Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, ValueName: InstallDirectory Status: WARNING Additional Notes: WARNING - Win32Exception Make Regi
Ripwave Modem User Guide Navini Networks, Inc. Make Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name: DisplayName, Value Data: Navini Diagnostics Status: SUCCESSFUL Make Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name: UninstallString, Value Data: "C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.
Navini Networks, Inc. Ripwave Modem User Guide Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\lib\ Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\ctl.jar Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\navDiag.jar Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\jfreechart-0.9.13.jar Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\jcommon-0.8.8.jar Status: SUCCESSFUL Install File: C:\Program Files\Nav
Ripwave Modem User Guide Navini Networks, Inc. ADDENDUM 2: End User Software License Agreement between Navini Networks, Inc. and Buyer ARTICLE 1 IMPORTANT MESSAGE 1.1 Act of Assent. Installing the Software indicates that you have read, understand and accept this License Agreement. ARTICLE 2 LICENSES 2.1 2.2 2.3 2.4 60 Grant of License. The Software and related Documentation, are the intellectual property of Navini Networks, Inc. and are protected by law. Navini Networks, Inc.
Navini Networks, Inc. Ripwave Modem User Guide 2.5 Suitability. a. Buyer alone is responsible for determining which software best suits Buyer’s needs, for installing and operating the Software, and for the results obtained. Accordingly, each Buyer should determine its needs, and evaluate the Software’s capabilities before making a final decision about licensing the software. b. Navini Networks, Inc. makes no representation that the Software conforms to or satisfies any federal, state, or local laws.
Ripwave Modem User Guide Navini Networks, Inc. ARTICLE 4 INDEMNIFICATIONS AND WARRANTY 4.1 4.2 Intellectual Property Indemnification; Entire Liability. ARTICLE 15 OF THE SUPPLY AGREEMENT TO WHICH THIS AGREEMENT IS ATTACHED STATES THE ENTIRE LIABILITY OF NAVINI NETWORKS, INC. WITH RESPECT TO INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS, TRADEMARKS, PATENTS, AND OTHER INTELLECTUAL PROPERTY RIGHTS BY THE LICENSED SOFTWARE, DOCUMENTATION, OR ANY PARTS THEREOF, AND NAVINI NETWORKS, INC.
Navini Networks, Inc. Ripwave Modem User Guide ARTICLE 6 OBJECT CODE ONLY-NO MODIFICATIONS 6.1 6.2 6.3 Modifications. In order to maintain the “trade secret” status of the information contained in the Licensed Software, Navini Networks, Inc. provides the Software in object-code form only. Buyer shall not modify, enhance, adapt, disassemble, translate, decompile or otherwise decode any portion of the object code of the Software module.
