User's Guide

Ripwave Modem User Guide Navini Networks, Inc.
16 050503_pv1.1_Ripwave Modem User
Guide_40-00097-00j(4.3)
Installing a USB Modem,
continued
Step Action Illustration (using LED Modem)
3. Connect the AC power
adapter cable to the back
of the Ripwave Modem.
Plug the other end of the
cable into a 110/220
VAC, 60/50 Hz outlet.
CAUTION! Only use
the AC power adapter
specifically supplied
with the Ripwave
Modem. Using any other
adapter may cause
damage to the Modem.
4. Rotate the antenna on
the Ripwave Modem
180 degrees to the UP
position. This reveals
the Modem’s indicator
lights.
CAUTION! Rotation of
the antenna in any other
direction may cause
damage to the Modem.
5. Turn the Modem ON.
On the 2.4 GHz Modem,
do this by flipping the
On/Off switch to the up
position. On all other
models, push the On/Off
button in.
2.4 GHz 2.3, 2.5, 2.6,
3.4, 3.5 GHz