User's Guide

Navini Networks, Inc. Ripwave Modem User Guide
0500503_pv1.1_Ripwave Modem User Guide _ 19
40-00097-00j(4.3)
Installing a USB Modem,
continued
Step Action Illustration
13. Confirm that the drive
location is correct (it
may be different than
the one shown in the
illustration). The file to
be installed should say
‘NETNNUSB.INF”.
Click Next to continue
Windows 2000 Screen
14. Windows will finish
installing the software
files required for the
Ripwave Modem
operation. Click Finish.
NOTE: For Window 98,
a window may appear
asking for drivers to be
installed from the
Windows 98 setup disk.
If so, insert the
Windows 98 setup disk
into the CD-ROM drive
at this time and accept
the defaults.
Windows 2000 Screen
15. After clicking Finish,
the System Settings
Change window appears
asking if you want to
restart your computer
now. Click Yes.
You must restart your
computer at this point
before proceeding.
Windows 2000 Screen
16. After the computer
restart is complete,
proceed to the
“Troubleshooting”
section of the manual.