User's Guide

Navini Networks, Inc. Ripwave Modem User Guide
0500503_pv1.1_Ripwave Modem User Guide _ 31
40-00097-00j(4.3)
Uninstalling Navini
Ripwave Monitor
(NavMon), continued
Installing Navini
Diagnostics
(NavDiag)
Step Action Illustration
4. Restart the PC to
complete the uninstall
process. This will ensure
it functions properly
after uninstalling.
If your Ripwave Modem has a software release prior to 4.0, you
have the Navini Monitor software and not the Navini Diagnostics.
Note: The screenshots shown in these instructions were taken from
a laptop with Windows 2000. If you have a Windows 98, XP, or
ME operating system, the screens you see may vary from the
screens shown in the instructions.
Step Action Illustration
1. Shut down all programs,
including anti-virus
software programs,
before installing the
Navini Diagnostics
software.
2. Insert the Navini
Diagnositcs Installation
CD into the CD-ROM
drive.
3. Open the CD by clicking
on the
My Computer
icon. Double-click on
the folder named
Navini_Diagnostics.
4. Double-click on the icon
for the file
navdiag_windows.exe*.
This will automatically
start the installation of
Navini Diagnostics.
*If your PC is running Mac
or Linux software, you will
need the navdiag_mac.sit or
navdiag_linux.bin file. Mac
users will need the Snuffit
extraction software.
Example:
Double-click
this file.
These 2 files used only
for USB Modems.
Double-click
this file.
These 2 files used only
for USB Modems.