User's Guide

Navini Networks, Inc. Ripwave Modem User Guide
0500503_pv1.1_Ripwave Modem User Guide _ 41
40-00097-00j(4.3)
Uninstalling Navini
Diagnostics (NavDiag),
continued
Optional
Batteries
Installing and
Charging the
Optional Internal
Battery
Step Action Illustration
4. The Uninstall Complete
screen appears when
finished. Click on
Quit
to close the Uninstall
screen.
Windows 2000 Screen
5. Restart the PC to
complete the uninstall
process. This will ensure
the uninstall process
completes successfully.
The Ripwave LED and LCD Modems have two types of optional
batteries associated with them: internal and external battery packs.
The internal battery pack is inserted into the Modem. Currently,
this battery pack has been manufacture discontinued. However,
existing internal battery packs are still supported.
The external battery packs come in two sizes. The Standard
External Battery Pack (S-EBP) provides approximately 16 Watt-
Hours of power while the Heavy Duty-External Battery Pack (HD-
EBP) provides approximately 44 Watt-Hours of power.
This section describes how to install and charge the optional
internal and external battery packs.
If you have an internal battery packs, the battery pack is installed in
the bottom of the Ripwave Modem. The battery compartment of
the 2.4 GHz Ripwave Modem varies from the 2.3, 2.5, 2.6, 3.4 and
3.5 GHz models. To install and charge or remove the battery pack,
follow the steps based on your model of Modem.