User's Guide

Ripwave Modem User Guide Navini Networks, Inc.
42 050503_pv1.1_Ripwave Modem User
Guide_40-00097-00j(4.3)
2.4 GHz Battery
Step Action Illustration
1.
Squeeze both tabs to
remove or install the
battery pack cover.
Note that the cover is
not used when the
battery pack is installed
in the Modem.
2.
Install the battery pack
into the Ripwave
Modem, ensuring that
the contacts on the
battery pack mate with
the contacts in the
Modem and that both
slides snap down
securely.
3.
Reinstall the battery
pack cover on the
Modem.
4.
To charge the battery,
connect the AC adapter
to the Modem and to an
AC power source
(110/220 VAC, 60/50
Hz). The battery
immediately will begin
charging regardless of
whether the On/Off
switch is on. However,
the pack will charge
faster if the on/off
switch is in the OFF
position.
If the on/off switch is
ON, the light indicator
will be constant yellow.
When fully charged, the
light will go off.