User's Guide

Navini Networks, Inc. Ripwave Modem User Guide
0500503_pv1.1_Ripwave Modem User Guide _ 49
40-00097-00j(4.3)
The Indicator Light
on the Heavy Duty
External Battery
Pack (HD-EBP)
Charging the
Heavy Duty
External Battery
Pack (HD-EBP)
The HD-EBP has one indicator light that resides on the back end of
the unit near the pig-tail cord. This light has four states associated
with it. The states are described below.
 Light is off when any of the following apply:
• The battery is not connected to a Modem or to the battery
charger
• The battery is connected to a Modem but the Modem is off
• The battery is connected to a Modem and the Modem is on
but the battery is empty of power
 Light is green when the battery is on and fully charged.
 Light is amber when the battery has power but is no longer
fully charged. If the battery is connected to the battery charger,
an amber light means the battery is being charged.
 Light is red when the battery is low on power. When the
battery is low, it has approximately 15% of its charge left.
The HD-EBP will need to be recharged when the battery is
connected to a Modem and the Modem is turned on but the LED on
the back of the battery remains off (indicating the battery has no
power) or is red (indicating the battery level is low).
To recharge the HD-EBP, use only the 12V charger that came with
the HD-EBP. Using any other charger may damage the battery.
To charge the HD-EBP:
 Plug the 12V adapter into the 12V input socket on the HD-
EBP.
 Plug the other end of the adapter into an electrical wall socket.
NOTE: Do not attempt to plug the 12V adapter into the Modem as this may
harm the Modem.
NOTE: The battery may charge while it is connected to a Modem.