User's Guide

Navini Networks, Inc. Ripwave Modem User Guide
0500503_pv1.1_Ripwave Modem User Guide _ 9
40-00097-00j(4.3)
Minimum
Computing
Requirements
(See, also, Addendum 1)
Operating
System
1
:
Ethernet Modems: Any Win32 Operating System
(OS) - Windows 95
2
, Windows NT, Windows 98
3
,
Windows 98SE
3
, Windows 2000, Windows ME
3
,
Windows XP
4
, or later version.
USB Modems: Windows 98SE
3
, Windows 2000,
Windows ME
3
, Windows XP
4,5,6
, or later version.
General Information:
 Ensure that the pc network port is enabled.
CPU:
Pentium level or higher
RAM:
32 MB or the Operating System minimum,
whichever is greater
Hard Drive:
50 MB free disk space for either monitoring
software (Navini Ripwave Monitor or Navini
Diagnostics Tool)
Monitor:
256 colors, 800 x 600 resolution
1
NOTE: To upgrade your Operating System after loading the Navini Monitor or
Navini Diagnostics software, you must first uninstall Navini Monitor or Navini
Diagnostics prior to upgrading the OS. Otherwise, Navini Monitor or Navini
Diagnostics will not work. See Uninstall instructions in this Guide.
2
NOTE: Internet Explorer 3.0 or higher is required for installation on Windows
95 Operating Systems.
3
NOTE: The Ripwave Modem must be left powered ON whenever you shut
down or restart any Windows 98 or ME platforms. If the Modem is off, a blue
screen appears on the monitor. In the event that happens you will most likely
have to power cycle the PC.
4
NOTE: Windows XP must be Service Pack Level 1 or higher.
5
NOTE: Navini Diagnostics software is supported on Win98, Win98SE,
Win2000, WinME, WinXP or higher, Mac X (also called Mac10) or higher, or
Red Hat Linux 8.0 or higher. Mac users must have the Snuffit extraction
software.
6
NOTE: USB will not work with Windows 95, Windows NT or Windows 98.
The Ripwave Modem installation sections include instructions for
both Ethernet and USB connections. Be sure to use the instructions
that apply to your Ripwave model. The Navini Monitor software
installation procedure is the same for any of the Ripwave models.
This manual will guide you through the simple process of installing
the Ripwave Modem and software, which has been developed to
optimize the ease and convenience for you, our valued customer.
The 2.6 GHz model is used in most of the illustrations in this
manual where there are no differences in the 2.3, 2.4, 2.5, 2.6, 3.4
& 3.5 GHz models.
If you experience any difficulties with your unit, please contact
your Service Provider or the vendor from whom you obtained your
Ripwave Modem.