User's Guide

Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide
Optional
Desktop
Antenna
Connecting the
Desktop Antenna
An optional desktop antenna is available for the PMX. This
antenna connects to the PMX and then sits on a surface next to the
laptop. The laptop should be used preferably on a desk when the
PMX is installed. Using the laptop with the PMX close to the body,
such as on the lap, is undesirable.
This antenna should be used if optimal reception cannot be
obtained through the PMX antenna. Following is a picture of the
optional desktop antenna.
To connect the desktop antenna to the PMX, you must first remove
the antenna attached to the PMX. To remove the antenna, turn the
antenna down so that it is lying parallel with the PMX. Grasp the
base of the antenna near its connection point and firmly pull the
antenna away from the card.
o not grasp the top or middle of the antenna as it may break when
nce the PMX antenna is removed, connect the desktop antenna by
D
you try to pull the antenna away.
O
inserting its connector into the port on the PMX.
Page 26
060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5)