- Cisco Router Installing Guide

4 Installing Cisco AC and DC Power Supplies in Cisco 2500 Series Routers

Removing AC and DC Power Supplies

Figure 2 Removing the Screw

Step 2

Disconnect the power connector from the system board. (See Figure 3.) Grasp the sides

of the power connector and pull upward while rocking the connector side to side.

Caution Do not pull on the connector wires.

Figure 3 Disconnecting the Power Connector

Step 3

Push the loosened power supply backward and lift it out of the chassis. (See Figure 4.)

H9079

Input: 100-240VAC

Freq: 50/60 Hz

Current: 1.2-0.6A

Watts: 40W

Screw

H9081

Power connector

Fan connector

Fan

AC power supply