IP Phone User Manual

7-21
User Guide for CiscoWorks QoS Policy Manager 4.1.6
OL-23444-01
Chapter 7 Provisioning: Configuring QoS for IP Telephony
Advanced IP Telephony Network Configuration
Example 7-1 ATM PVC Virtual Template
interface ATM4/0.60 point-to-point
protocol ppp Virtual-Template60
!
interface Virtual-Template60
bandwidth 256
ip address 10.200.60.1 255.255.255.252
ppp multilink
Example 7-2 Frame Relay DLCI Virtual Template
!
interface Serial6/0
no ip address
encapsulation frame-relay
!
interface Serial6/0.60 point-to-point
bandwidth 256
frame-relay interface-dlci 60 ppp Virtual-Template60
!
interface Virtual-Template60
bandwidth 256
ip address 10.200.60.2 255.255.255.252
ppp multilink
If you have already added the devices to QPM, rediscover the devices in QPM so that the virtual template
interfaces are recognized. See Rediscovering Device Information, page 4-12.
Otherwise, add the devices to QPM (see Adding Devices to the Device Inventory, page 4-3).
Step 2 Create policy groups from these QPM templates, and assign them to the described interfaces.
• WanATM2FR-FR-Main—Assign to the main Frame Relay interface.
• WanATM2FRVirtualTemplate—Assign to both the ATM and Frame Relay virtual template
interfaces.
• WanATM2FR-FR-DLCI—Assign to the Frame Relay DLCI.
• WanATM2FR-ATM-PVC—Assign to the ATM PVC.
Step 3 Deploy the policies. See Deploying Policies and QoS Configurations, page 9-2.