User's Manual

6
Note The universal bracket works with electrical boxes, can
be used for wall mounting, and adapts to ceiling
installations. It leaves a larger gap between the
mounting surface and the access point, which allows
space for the USC 5310 plug-in module.
For more information, refer to “Access Point Mounting
Instructions” at the following URL:
http://www.cisco.com/en/US/docs/
wireless/access_point/mounting/guide/apmount.html
3 Verify Your Installation
After the USC 5310 module is installed in the access point and
powered up, it takes approximately ten minutes for the module
to initialize, download any necessary software and
configuration information, configure the radio frequency (RF)
parameters, and come into service.
Take note of the initialization sequence by noting the color and
activity of the LEDs on either side of the module. The module is
ready to use when the LEDs change to solid green.