User's Manual

24
4.3 Secure the MR16
Depending on your mounting environment, you may want to secure the MR16 to its mount location. Your MR16
can be secured in several ways. If the MR16 has been installed using the mount plate, it can be secured via security
screw (Torx and phillips head security screws are included; choose one) and/or Kensington lock. If the mount plate was
not used, the MR16 can still be secured using a Kensington lock.
Pad lock installed
Kensington lock hard point
Security screw engaged
4.3.1 Security Screw
Install the security screw in the lower mount plate tab as shown.
4.3.2 Kensington Lock
Attach a Kensington lock cable to the access point at the hard point on the side of the device.
Attach the other end of the cable to a secure location, such as a pipe or building fixture.
Device secured with security screw