User's Manual

3
Table of Contents
1 Scope of Document and Related Publications 4
2 MR16 Overview 5
2.1 Package Contents 5
2.2 Understanding the MR16 5
2.3 Security Features 7
2.4 Power Source Options 7
2.5 Factory Reset Button 7
2.6 LED Indicators and Run Dark Mode 7
2.7 UL 2043 Plenum rating 7
3 Pre-Install Preparation 8
3.1 Configure Your Network in Dashboard 8
3.2 Check and Upgrade Firmware 8
3.3 Check and Configure Firewall Settings 8
3.3.1 Firewall Settings 8
3.3.2 Assigning IP Addresses to MR16s 9
3.2.2.1 Dynamic Assignment 9
3.2.2.2 Static Assignment 9
3.2.2.3 Static IP Assignment via DHCP Reservations 9
3.4 Collect Tools 10
3.5 Collect Additional Hardware for Installation 10
4 Installation Instructions 11
4.1 Choose Your Mounting Location 11
4.2 Install the MR16 11
4.2.1 Attach the Mount Plate 11
4.2.1.1 Wall or Solid Ceiling Mount Using Mount Plate 13
4.2.1.2 Drop Ceiling Mount Using Mount Plate 14
4.2.1.3 Electrical Junction Box Mount Using Mount Plate 18
4.2.2 Power the MR16 18
4.2.2.1 Powering the MR16 with Meraki AC Adapter 18
4.2.2.2 Powering the MR16 with Meraki 802.3af Power over Ethernet Injector 19
4.2.2.3 Powering the MR16 with an 802.3af Power over Ethernet Switch 19
4.2.3 Mount the MR16 20
4.2.3.1 Assemble MR16 to the Mount Plate 21
4.2.3.2 Desk or Shelf Mount 23
4.2.3.3 Wall or Solid Ceiling Mount without Mount Plate 23
4.2.3.4 Plenum Mount (Above Drop Ceiling) 24
4.3 Secure the MR16 25
4.3.1 Security Screw 25
4.3.2 Kensington Lock 25
4.4 Verify Device Functionality and Test Network Coverage 26
5 Troubleshooting 26
6 Regulatory Information for MR12 27
7 Regulatory Information for MR16 30