User's Manual

4.2.2 Power the MR24

If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the Mount Plate:

If mounting to a wall or ceiling, the Ethernet cable will feed through the cable slot on bottom of the MR24.

Cable access hole

4. Securely attach the clips on either side of the T-bar box hanger to the suspended ceiling grid T-rails.

5. Connect a grounding wire (not included with T-bar box hanger) to the grounding hole in the bracket mounting clip

and to metal building structure. A grounding wire is required to comply with the U.S. National Electric Safety Code.