User's Manual

26
4.3 Secure the MR24
Depending on your mounting environment, you may want to secure the MR24 to its mount location. Your MR24
can be secured in several ways. If the MR24 has been installed using the mount plate, it can be secured via security
screw (Torx and phillips head security screws are included; choose one), pad lock and/or Kensington lock. If the mount
plate was not used, the MR24 can still be secured using a Kensington lock.
4.3.1 Security Screw
Install the security screw in the lower mount plate tab as shown.
4.3.2 Pad Lock
Make sure the security hasp has been pre-assembled per section 4.2.3.1 before mounting the MR24 to the
mount plate. Attach pad lock (Masterlock 120T or equivalent) to pad lock hard point on bottom of device.
4.3.3 Kensington Lock
Attach a Kensington lock cable to the access point at the hard point on the side of the device.
Attach the other end of the cable to a secure location, such as a pipe or building fixture.
Pad lock installed
Kensington lock hard point
Security screw engaged