User's Manual

3
Table of Contents
1 Scope of Document and Related Publications 4
2 MR24 Overview 5
2.1 Package Contents 5
2.2 Understanding the MR24 5
2.3 Security Features 7
2.4 Ethernet Ports 7
2.5 Power Source Options 7
2.6 Factory Reset Button 7
2.7 LED Indicators and Run Dark Mode 7
2.8 UL 2043 Plenum rating 8
3 Pre-Install Preparation 8
3.1 Configure Your Network in Dashboard 8
3.2 Check and Upgrade Firmware 8
3.3 Check and Configure Firewall Settings 8
3.4 Assigning IP Addresses to MR24s 9
3.4.1 Dynamic Assignment 9
3.4.2 Static Assignment 9
3.4.3 Static IP Assignment via DHCP Reservations 9
3.5 Collect Tools 10
3.6 Collect Additional Hardware for Installation 10
4 Installation Instructions 11
4.1 Choose Your Mounting Location 11
4.2 Install the MR24 11
4.2.1 Attach the Mount Plate 11
4.2.1.1 Wall or Solid Ceiling Mount Using Mount Plate 13
4.2.1.2 Drop Ceiling Mount Using Mount Plate 14
4.2.1.3 Electrical Junction Box Mount Using Mount Plate 18
4.2.1.4 Plenum Mount (Above Drop Ceiling) 19
4.2.2 Power the MR24 20
4.2.2.1 Powering the MR24 with Meraki AC Adapter 21
4.2.2.2 Powering the MR24 with Meraki 802.3af Power over Ethernet Injector 21
4.2.2.3 Powering the MR24 with an 802.3af Power over Ethernet Switch 22
4.2.3 Mount the MR24 22
4.2.3.1 Assemble Security Hasp to the MR24 22
4.2.3.2 Assemble MR24 to the Mount Plate 23
4.2.3.3 Desk or Shelf Mount 25
4.2.3.4 Wall or Solid Ceiling Mount without Mount Plate 25
4.3 Secure the MR24 26
4.3.1 Security Screw 26
4.3.2 Pad Lock 26
4.3.2 Kensington Lock 26
4.4 Verify Device Functionality and Test Network Coverage 27
5 Troubleshooting 27
6 Regulatory Information for MR24 28